Tablet Processing Machine

Product Details:

Features:

• Inlet & Outlet: All dryers have a 5 micron pre filter at the inlet and a manually infinite adjustable damper at the outlet.
• Door: Door is provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.
• Air Circulation: Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer.
• Heating: Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers.
• Temperature Control: Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
• Trays: Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / Frp/ M.S. galvanized as per clients requirements.
• Trolley: Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.
• Control Panel: Automatic Control panel is fitted on the side of the dryer. If consists of starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons, timers, controllers etc.

Product Details:

Multi Mill is used for high speed granulating, pulverizing, mixing, shredding and chopping, etc of a wide range of wet and dry materials without special attachments. As compared to the four common principles of size reductions i.e. grinding, compression, impact and shearing, which often do not produce controlled size reduction, this machine utilizes the principle of variable force swing hammer blades having both knife and impact edges rotating with a carefully selected screen to control size reduction. Flow path of material in vertical rotor machine is streamlined. During Communication, material entering the chamber travels to the periphery and passes through the screen tangentially and radially avoiding chocking and temperature rise.

Salient Features:

• Machine Portable on castor wheels
• High output with process uniformity
• Machine rated for continuous operation
• All contacts parts SS 304 AISI Quality ( SS 316 Quality Optional)
• Direction of blade rotation by reversing switch
• Various combinations of screens/speeds/number of blades/direction of rotation of blades, can be selected
• Higher screen opening area for higher output
• All contact parts can easily be dismantled and clean for change of product
• Wide range of SS perforated and wire knitted screens available
• Dust free operation
• Additional perforated screen at the bottom of pulverizing chamber to eliminate higher percentage of fineness and control granule size more effectively and obtain higher outputs.
• Direction of beaters can be changed by reversible switch.
• Machine is designed for continuous operation.
• Cylindrical screen for higher output.
• Castor wheels provided for mobility.
• Flameproof electrical components can be provided at extra cost.
• Beaters and scraper blades of S.S. 304 material.
• All contact parts can be easily and quickly dismantled and cleaned.

Product Details:

Features:

• Gravity Feeding System
• Two Piece Turret

Control Panel with START/STOP:

• Hand Wheel Provided.
• Re-designed variable speed pulley
• Turret of SGIRON 400/12 grade casting
• SS Turret Guards.
• Lower Punch Cam can be removed without dismantling the Lower Roller Assembly.

Product Details:

Dome Shaped bowl which helps the products in to whirling motion with the help of impeller for the better mixing. Inclination of the impeller gives the rising and tumbling motion of the product in the bowl due to the impeller blades of two full and two half solid blades. Specially designed chopper blade with high speed and uniform granulation through out the product inside the bowl. For the easy discharge of the product auto discharge with pneumatic system is provided which can be directly discharge in to the FBD bowl.

Salient Features:

• Unit is designed to meet the requirement of cGMP System
• Precision engineering to minimize clearance between bowl and the impeller
• Safety measures has be taken care for easy operation
• Discharge can be give any side to suit the requirements

Optional Features:

• Machine can be supplied with FLP on request
• Material handling device can be provide for loading of the material
• CIP system can be provided

Advantages:

• In compliance with cGMP guidelines
• Modular Design
• Mixing of substances uniformly and homogeneously with special design Mixer & Chopper blades.
• Electro-Pneumatic Operated Discharge
• Effective sealing
• Easy to clean machine
• Fully Automatic Operation through Programmable Logic Controller (Optional)
• Binder addition system (Optional)
• Inline co-mill for uniform granules. (Optional)
• Flameproof Construction (Optional)

Specifications:

Product Details:

By utilizing the assistance and knowledge of our hard-working workforce, we are betrothed into providing our clients a distinctive assortment of Single Rotary Tableting Machine in the national as well as international market. These machines are available in varied models and stipulations as per the needs and demands of our customers. Along with this, these machines are highly recommended among our customers.

Features:

• Convinced optimized design
• Easy maintenance
• High performance

Single Rotary Tableting Machine GMP Model

• In compliance with cGMP guidelines
• Variable speed pulley drive
• Overload pressure release arrangement
• Interlocking at Upper guards
• Dust nozzle with clamp
• Auto Lubrication (optional)

Specifications:

The max. Attainable output is depending upon the following factors.

• The physical and chemical properties of material to be compressed
• The tablet shape, weight and its thickness
• Ambient Condition
• Operator skills etc

Product Details:

We are offering 10/12 STN Bolus Single Rotary Tablet Compression Machine.

Salient features:

• Gravity Feeding system
• Control Panel with separate display for
• Tablet Count and rpm
• Fixed Hopper with slide to control power flow
• Hand wheel provided
• Re-designed variable speed pulley
• Turret of Sgiron 400/12 grade casting
• Central oil lubrication system with hand pump
• Phosphor bronze bush provided inside the turret hole.
• SS Turret Guards.

Product Details:

Vibro Separator is a screening unit Vibrating in three planes along the vertical axis. A specially designed Vibratory Motor having eccentric weights at the top accomplishes this and bottom ends of the motor shaft. The motor is mounted vertically at the center of the screening assembly, on a circular base by means of springs, which allow the unit to vibrate freely. The springs absorb the vibrations and prevent them to be transmitted to the floor.

Features:

• Simple & Compact construction.
• Faster Separation
• Double & Triple deck screens with outlet and hopper for bottom deck available on request.
• Lesser Maintenance and Power Consumption than the Conventional Sifter.
• Easy dismantling and cleaning facility

Specifications:

Product Details:

We are instrumental in offering a quality range of Paste Kettle Vessel, specially manufactured by high grade raw material. This Paste Kettle Vessel is widely appreciated for its features like efficient for preparation of starch paste, excellent durability, strong structure, high performance and fine finishing. We are also offering customized range of Paste Kettle Vessels as per the requirement of the client. We are offering Paste Kettle Vessel at market leading prices.

Salient Features:

• Entire construction in Stainless steel
• Semi hemispherical bowl ensure that entire bowl can be emptied by rotating the worm wheel.
• Simplified construction enables ease of operation.
• Easy to operate.
• Steam or electric heating is possible depending upon the user requirements.
• When used with stirrer / anchor the movement of anchor is forward and reverse using cyclic timer. Stirrer can be supplied at additional cost
• When supplied with stirrer, there is a top entry drive without using any "V" belt. Stirrer can also be removed for cleaning. Temperature indication is possible at additional cost.

Construction of Paste Kettle Vessel:

• Paste kettle vessel will be made out of S.S. 304 rectangular pipes of 3 mm thk and will be an independent resting type frame work where no foundation will be required.
• The kettle will be a hemispherical type bowl with either steam / oil / water heating jacket will be provided. The kettle will be manufactured from 2.5 mm thk S.S. 304 sheet and the jacket will be of 2.5 mm mild steel (in case of steam jacket the thickness will be 4 mm). There will be oil / water heated fitted at the back bottom side of the kettle.
• The kettle will be having a worm type arrangement for tilting.
• A temperature controller and a temp indicator will be provided for temp control and indication.
• The kettle will be insulated with 50 mm thk glass wool insulation and claded with 16 swg s.S. 304 sheet. Kettle will be buffed to 150 grit matt finish externally and internally the kettle will be buffed to 220 grit mirror finish.

Product Details:

The use of ‘Fluid-Bed’ technique on industrial scale, has been considerably on the increase, specially for drying, cooling, calcination, agglomeration, combustion and in many other unit operations, due to its manifold advantages.

Special Features:

• Rapid exchange of granules
• Low drying temperature
• Electric or steam heated
• Little space required

Advantages:

• In compliance with cGMP guidelines
• Uniform Drying with reducing Drying time
• Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
• Online Sampling Device
• Fully Automatic Operation through PLC (Optional)

Specifications:

Product Details:

Intimate and homogenizer mixing of products is employed by planetary motion of beaters and centrally located homogenizer. Equipments ideally suitable for through mixing of ointments, creams, lotions, tooth paste etc. in sterile or non-sterile conditions. Product container provided with jacket to heat and cool for circulation of steam/cold water. Mixer is also designed to operate under vacuum to remove air entrapment in product during mixing. High speed disperser suitable for homogenizing the product with independent drive at the center.

Applications:

• Ointments, Creams, Ceramics, Ink Pastes, Color, Pigments Rubber, Compound & Adhesives.

Special Features:

• Product bowl mounted on castor wheels for easy portability, washing & transporting mixed materials.
• Jacketed bowls available for heating or cooling of products during mixing
• Provision to mix materials under vacuum for duration purpose.
• Double beater open type to cover full cross section of products in bowl.
• For ointments, paste, cream, lotion etc. high speed emulsifier provided for homogeneous mixing and to produce luster product.
• Scrapper of suitable design to avoid localized heating or cooling & ensure uniform mixing.
• Flameproof construction optional
• Motorized drive assembly for lifting and lowering.
• Needs comparatively smaller area for installation.
• Electrical control panel with back up fuses and indicator lamps for easy process control
• Contact parts of SS 304 Q material. SS 316 construction optional.
• Higher capacities models 1000 L. to 1500 L on request

Specifications:

 

Product Details:

Features:

• Fully Automatic printing machine for capsule/tablet of any size.
• 100% feeding gives higher output depending upon the size of capsule/tablet. smaller the size, higher the output
• Prints on any shape-Round, Oval, Hexagonal, and Triangular etc. -Wax, Sugar or film coated tablets.
• Provides sharp printing on both capsule and tablets.
• Imported pneumatic components used for better performance.
• Hardened gears and shafts give longer life span.
• A versatile, trouble free, easy to operate machine.
• Prints on two sides on a vast range of products.
• Almost any size and shape like Round, Oval, Football, Pumpkin seed, Coffin, Triangular or Hexagonal tablets, Wax, Sugar and Film coated tablets, soft / Hard gelatin capsules Polished and Sealed compressed products all are handled on Trade Mark Printers.
• Edible Ink 45-50 Lakh/kg. on continual usage.
• IPA 20% of Edible Ink for Capsule.
• IBA 20% of Edible Ink for Tablet.
• Scrapper Blade - 48 HR Span/ Each. (May break on higher tighten).
• Lab models and CP-XL details available upon request.

Product Details:

Silent Features:

• To count 1 to 1000 Capsules/Tablets
• 36" Dia Disc providing highest filling capacity
• Custom Designed disc to match specific needs
• Special Dust Extractor to remove Dust Particles from the passage of the Container
• Fitted with Heavy Duty Gear Box

Output:

• To count 1000 Tablets/Capsules in Bottles and Polybags
• 1000 Tablets/Capsules 5/6 Fills/Min
• 500 Tablets/Capsules 5/10 Fills/Min
• 250 Tablets/Capsules 10/15 Fills/Min
• 100 Tablets/Capsules 25/30 Fills/Min

Product Details:

Coating Machine ideal for film and sugar coating. The machine is designed with fabricated structure fitted with SS enclosure and drive unit of motor and reduction gear box. The machine is mounted on dynamounts which avoids foundation and vibration. A hot air blower system is provided separately on trolley for easy cleaning and setting. The system has thermostat controller to selected temperatures between 40º C to 100º C by electric Heater. The complete systems fitted suitable motor, blower, piping and nozzle for hot air flow.

Salient Features:

• Design as per stringent cGMP requirements
• All Non contact parts of AISI Stainless Stele 304 Quality
• Easy to replace polishing pan and other size coating pan

Optional Features:

• Fixed or detachable type baffle.
• Spraying system with peristaltic pump and air atomizing nozzle.
• Polishing Pan.

Product Details:

Octagonal Blender, due to its octagonal shape is designed to process larger volume of material.It occupies less space compared to other similar blenders like `V' and Double Cone. Power consumption is also less the blending takes place at low speed during operation.It is well balanced even in higher capacities.

Features:

• Octagonal Blender is supplied with a bin charging system or can be designed for vacuum charging.
• It is a very useful machine for pharmaceutical industry wherein gentle blending of dry granules of powders is to be done.
• It is a slow speed blender and has a removable baffle mounted through a rectangular openable lid. Other important feature of this machine is ease of cleaning in place.
• The bin charging system can also be incorporated in it, which is a dust free closed system for charging and discharging of powders or granules.
• The power consumption is comparatively lower than the other similar type of blenders.

Application:

• Dry powder mixing for tablets and capsules formulations.
• Dry granules sub lots mixing to increase the batch size at bulk lubrication stage of tablet granules. .

Specifications:

Note:

• “V” shape blenders (50 ltrs - 2000 ltrs), Double Cone Blenders (50 ltrs - 2000 ltrs) & Cage Blenders (50 ltrs - 1800 ltrs) are available on request.

Product Details:

Features:

• Automatic compression and ejection device with revolution of the wheel drive.
• The unit is built on a heavy cast or molded steel fabricated with eccentric pressure system.
• Hopper provided and connected by a rubber tube.
• Easy setting for thickness and hardness of tablets. Complete with one Die and set of punch of size 9 mm of chromium steel.

The basic components of any Tablet Machines are included in our design and are as follows:

• Hopper for holding and feeding granulation to be compressed.
• Dies that define the size and shape of the tablet.
• Punches for compressing the granulation within the dies.
• Cam tracks for guiding the movement of the punches.
• A feeding mechanism for moving granulation from the hopper into the dies.
• Our Tablet machine is a single Punch machine which is capable of making only one tablet at one stroke.

Note:

• That all the compression is applied by the upper punch, making the single punch machine a Stamping Press.

Product Details:

We are offering our clients a high quality assortment of Punch Keeping Cabinet at reasonable price.

Product Details:

Counted as one of the eminent organizations of the market, we are affianced in manufacturing a world class assortment of Double Rotary Tableting Machine to our respected customers. Our offered machines are highly recommended among our customers for their sturdy construction and high functionality. Apart from this, these machines are available at very reasonable prices.

Features:

• Durability
• Performance-oriented design
• Enhanced service life

Double Rotary Tableting Machine GMP Model:

• In compliance with cGMP guidelines
• Output up to 226,800* Tab/Hr (Max)
• Variable speed pulley
• Gravitational feed frame
• Interlocking at Upper Guards
• Dust Nozzle with clamp
• Force feeder with variable frequency drive (optional)
• PLC system (optional)

Specifications:

The max. Attainable output is depending upon the following factors.

• The physical and chemical properties of material to be compressed
• The tablet shape, weight and its thickness
• Ambient Condition
• Operator skills etc.

 

Product Details:

Salient Features:

• Design is cGMP – Current Good Manufacturing Practices compliance.
• Uniform Mixing with paddle blade stirrer.
• Self adjusting sealing arrangement to avoid entire black particles.

Application & Process:

• The Mass Mixer is designed for uniformly mixing of dry and wet material and especially suitable for powder of Pharmaceuticals, Food, Herbals, Agro Chemicals & Chemicals.

Product Details:

We hold expertise in offering a distinguished range of Manual Tablet Capsule Counters. Our product range is available for counting the capsules & tablets of almost any shape and size. These products are available for counting capsules/tablets from the numbers ranging 10 to 500. We provide these products in light weight aluminum and stainless steel for ensuring easy handling.